Output Terminal Panel Familiarization - MQ Power WHISPERWATT DCA25SSIU4FC8 Operation Manual

Table of Contents

Advertisement

OUTPUT TERMINAL PANEL
The output terminal panel (Figure 6) shown below is
provided for the connection of electrical loads. Lift up on
the cover to gain access to receptacles and terminal lugs.
NOTICE
Terminal O is neutral bonded to the ground from the
factory.
PAGE 20 — DCA25SSIU4FC8 60 HZ GENERATOR • OPERATION MANUAL — REV. #0 (08/23/22)

OUTPUT TERMINAL PANEL FAMILIARIZATION

Figure 6. Output Terminal Panel
OUTPUT TERMINAL FAMILIARIZATION
The output terminal panel (Figure 6) is provided with the
following:
„ Two (2) 240/120-volt, 50-amp output receptacles
„ Two (2) 50-amp circuit breakers
„ Two (2) 120-volt, 20-amp GFCI receptacles
„ Two (2) 20-amp GFCI circuit breakers
„ Five (5) output terminal lugs (U, V, W, O, Ground)

Advertisement

Table of Contents
loading

Table of Contents