Figure 4-7 Installation Of Gi 275 Display In The Instrument Panel - Garmin GI 275 Installation Manual

THE AREA ON THE BACK OF THE INSTRUMENT PANEL THAT COMES IN DIRECT CONTACT WITH THE GI 275
MUST BE PREPARED FOR ELECTRICAL BOND PER SECTION 4.2.2. PREPARE AREA 0.125 INCHES LARGER
1
THAN THE GI 275 METAL INSERTS.
ITEM QTY PART NUMBER
MS35214-XX
1 3
MS24693BB-XX
Notes:
[1] Screws can be substituted with any suitable pan head or countersink #8-32 UNC-2A
aerospace steel screws.
[2] Torque screws to 8.0 ± 1.0 in-lbf.

Figure 4-7 Installation of GI 275 Display in the Instrument Panel

190-02246-14
Rev. 11
INSTRUMENT
1
SCREW, MACHINE, PAN HEAD, CROSS-RECESSED,
[1] [2] BRASS 0.164-32 UNC-24
SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100°,
[1] [2] CROSS-RECESSED, BRASS, #8-32 UNC-2A
PANEL
GI 275 FASTENER
HOLE 3 PLACES
GI 275 REF
INSTRUMENT PANEL
REF
DESCRIPTION
OR
GI 275 STC EIS & MFD Installation Manual
Page 4-11