Figure 5-19 Side Text Example; Fuel; Diagnostics - Garmin GI 275 Installation Manual

Side Text
The GI 275 EIS provides the Side Text feature for twin-engine aircraft. Side Text allows each gauge to be
labeled L, R, or F to more easily differentiate between EIS 1 and EIS 2 in left/right twin-engine aircraft as
well as centerline thrust (forward/rear) twin-engine aircraft. In single-engine aircraft, this feature should
remain set to the default None.
5.7.5

Fuel

Main Tank
Configure to Single Main or Left & Right for the aircraft main tank.
AUX Tank
Configure to None, Single AUX/Tip, or Left & Right for the aircraft auxiliary tank.
AUX Label
Configure to AUX or Tip for the auxiliary tank label.
Fuel Type
Configure to Avgas, Jet A, or Jet B for the aircraft fuel type.
Quantity Calibration
Refer to Section 5.8.3.1 for the Fuel Quantity Calibration procedure.
Full Capacity
Configure the full capacity of the main tank.
Tab Capacity
Configure the tab capacity of the main tank.
5.7.6

Diagnostics

Sensor Status
Displays information on installed GEAs, including temperature and port configurations. Select between
EIS 1 and EIS 2 (if applicable) in the Selected Unit field.
GEA Status
Displays status of configured EIS sensors.
190-02246-14
Rev. 11

Figure 5-19 Side Text Example

GI 275 STC EIS & MFD Installation Manual
Page 5-44