Miscellaneous; Battery - Garmin GI 275 Installation Manual

5.6.5

Miscellaneous

Traffic Color
Must be set to White. This color designates the base color for traffic targets.
Altitude Alerter
Not configured per this manual.
Database Sync
GI 275 and GTN 6XX/7XX or GTN Xi units synchronize databases using Database Sync in order to
minimize user effort when loading/updating databases. The user only has to insert an SD card with
databases to be loaded into the GTN 6XX/7XX or GTN Xi and the databases will be updated on all
connected LRUs for all displays with Database Sync enabled rather than having to update each unit
individually. The GI 275 system and GTN 6XX/7XX or GTN Xi will have different system IDs. The
databases being synchronized must be enabled for both system IDs in order to allow the Database Sync to
take place. Refer to Section 5.2 for more information on acquiring and loading databases.
The following databases are synchronized:
• Airport directory
• Aviation
• Obstacle
• SafeTaxi
• Basemap
The following databases are not synchronized:
• Terrain
Make the desired selection between Pilot Control and Disabled for Database Sync functionality. Selecting
Pilot Control enables Database Sync functionality.
CDI & BARO Side SYNC
With this setting enabled, changing the CDI source on the GI 275 will also change it on the other GI 275.
Choose from Always On or Pilot Control. The default is Pilot Control.
Outside Air Temp
This setting is not applicable for MFD and EIS installations.
5.6.6

Battery

This configures whether a backup battery is installed in the GI 275. The backup battery is optional. This
should only be enabled if the GI 275 backup battery is installed per Section 4.3.2.
When toggled from disabled to enabled (illuminated green), the GI 275 will trigger a requirement to
perform a Battery Rundown Test (refer to Section 5.8.2). Until this test is completed, the GI 275 will
produce an annunciation in Normal mode.
190-02246-14
Rev. 11
GI 275 STC EIS & MFD Installation Manual
Page 5-32