Figure E-6 Strip Gauge Priority Examples - Garmin GI 275 Installation Manual

8. CDT/IAT Diff
9. Digital
a. ALT AMPS
b. BATT Volts
c. BUS Volts
d. BATT AMPS
(Without Red or Yellow Markings)
10. Oil Pressure
11. Oil Temperature
12. Fuel Flow
13. Fuel Pressure
14. Carb Temp
15. CDT
16. IAT
17. CDT/IAT Diff
The nomenclature with examples shown below can be used to determine EIS gauge placement:
[S1] Oil Press, unless Aux Fuel and alerting digital gauges are configured; if so, shift this and the
subsequent gauges down.
[S2] Oil Temp
[S3] 1. Highest priority marked gauge
2. Fuel Pressure
3. Highest priority unmarked gauge
[S4] 1. Next highest priority marked gauge
2. Fuel Flow
3. Next highest priority unmarked gauge
Refer to Figure E-7 for more information.
190-02246-14
Rev. 11

Figure E-6 Strip Gauge Priority Examples

GI 275 STC EIS & MFD Installation Manual
Page E-5