Xerox AltaLink C8130 Series User Manual page 312

Troubleshooting
Jams During Automatic 2-Sided Printing
P P R R O O B B A A B B L L E E C C A A U U S S E E S S
Using paper of the wrong size, thickness, or type.
Paper type is set incorrectly in the print driver.
Paper is loaded in the wrong tray.
Tray is loaded with mixed paper.
C L E A R I N G F I N I S H E R J A M S
Clearing Jams in the Integrated Office Finisher
1. Open the finisher front door.
2. Carefully remove the jammed paper.
Note: If the paper is torn, remove all torn pieces of jammed paper from the printer.
312
Xerox ® AltaLink ® C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide
S S O O L L U U T T I I O O N N S S
Use paper of the correct size, thickness, or type. For
details, see Supported Paper.
Ensure that the paper type is set correctly in the driver
and that the paper is loaded in the correct tray. For
details, see Supported Paper.
Ensure that paper is loaded into the correct tray. For
details, refer to Supported
Load the tray with only one type and size of paper.
Paper.