Xerox AltaLink C8130 Series User Manual page 213

6. To engage the fine-adjustment block, pinch the levers and slide the guides inward.
LO A D I N G PA P E R I N T R AYS 3 A N D 4 O F T H E TA N D E M T R AY M O D U L E
The control panel displays a warning message when the paper in the tray is in short supply, or when a tray is empty.
To change the paper size in Trays 3 and 4, refer to
To load the paper in Trays 3 and 4 of the Tandem Tray Module:
1. Pull out the tray until it stops. Wait for the tray to lower and stop.
2. Fan the edges of the paper before you load it into the paper trays. The procedure separates any sheets of
paper that are stuck together and reduces the possibility of paper jams.
Note: To avoid paper jams and misfeeds, do not remove the packaging from the paper until you are ready
to use it.
Xerox ® AltaLink ® C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide
Configuring Trays 3 and 4 of the Tandem Tray
Paper and Media
Module.
213