Xerox AltaLink C8130 Series User Manual page 287

P R I N T E R H A S T W O P O W E R S W I TC H E S
P P R R O O B B A A B B L L E E C C A A U U S S E E S S
The printer has two power switches and one is not
powered on.
P R I N T E R D O E S N O T P O W E R O N
P P R R O O B B A A B B L L E E C C A A U U S S E E S S
The power switch is not switched on.
The power cord is not plugged into the outlet correctly.
Something is wrong with the outlet connected to the
printer.
The printer is connected to an outlet with a voltage or
frequency that does not match the printer
specifications.
C C a a u u t t i i o o n n : :
Plug the three-wire cord with grounding prong directly into a grounded AC outlet. Do not use a
power strip. If necessary, contact a licensed electrician to install a properly grounded outlet.
P R I N T E R R E S E T S O R P O W E R S O F F F R E Q U E N T LY
P P R R O O B B A A B B L L E E C C A A U U S S E E S S
The power cord is not plugged into the outlet correctly.
A system error occurred.
Xerox ® AltaLink ® C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide
S S O O L L U U T T I I O O N N S S
Power off the printer.
• Press the P P o o w w e e r r / / W W a a k k e e button on the control panel.
• Open the front door and power off the main power
switch.
Power on the printer.
• Open the front door, then power on the main
power switch.
• At the printer control panel, press the P P o o w w e e r r / / W W a a k k e e
button. For details, refer to
S S O O L L U U T T I I O O N N S S
• Open the front door and check that the main power
switch is in the On position.
• At the printer control panel, press the P P o o w w e e r r / / W W a a k k e e
button. For details, refer to
Power off the printer, then plug the power cord into the
outlet securely. Use the bracket provided with the
printer to secure the power cord in place.
• Plug another electrical appliance into the outlet
and check if it operates properly.
• Try a different outlet.
Use a power source with the specifications listed in the
Electrical Specifications.
S S O O L L U U T T I I O O N N S S
Power off the printer. Confirm that the power cord is
plugged in correctly to the printer and the outlet, then
power on the printer.
Power off the printer, then power on again. If the error
persists, contact your Xerox representative.
Troubleshooting
Power Options.
Power Options.
287