Cleaning The Wipers - Pitney Bowes AddressRight DA Series Operator's Manual

Cleaning the Wipers

The wipers beneath the module of ink cartridges will, over time, pick
up ink, wax, clay and other material. Once enough of this material
accumulates on the wipers, it will leave marks or smears on the
material.
1. Open the print station cover.
2. Loosen the print head
assembly locking screw.
3. Rotate the print head assembly
up and back to expose the
wipers. You may need to move
the print head assembly to the
front or rear to gain clearance
to swivel the assembly fully
back.
4. Use alcohol on a soft cloth to
remove any ink, wax, etc. to
SV61722 Rev. D
Printer Maintenance • 3
Locking Screw
Wipers
3-9