Cleaning The Printer; Cautions When Cleaning - Pitney Bowes DP50S Operating Instructions Manual

7. Cleaning the Printer

This chapter explains how to clean this printer.

Cautions When Cleaning

• To avoid hazardous electric shock or laser radiation exposure, do not remove any covers or
screws other than those specified in this manual. When the machine needs to be checked, ad-
justed, or repaired, contact your service representative.
• Do not take apart or attempt any modifications to this machine. There is a risk of fire, electric shock,
explosion or loss of sight. If the machine has laser systems, there is a risk of serious eye damage.
• When removing misfed paper, do not touch the fusing unit because it could be very hot.
Clean the printer periodically to maintain fine printing.
Dry wipe the exterior with a soft cloth. If dry wiping is not enough, wipe with a soft, wet cloth that is
wrung out well. If you still cannot remove the stain or dirt, apply a neutral detergent, and then wipe over
with a well-wrung wet cloth, dry wipe, and then let it dry.
• To avoid deformation, discoloration, or cracking, do not use volatile chemicals, such as benzine
and thinner, or spray insecticide on the printer.
• If there is dust or grime inside the printer, wipe with a clean, dry cloth.
• You must disconnect the plug from the wall outlet at least once a year. Clean away any dust and
grime from the plug and outlet before reconnecting. Accumulated dust and grime pose a fire
hazard.
7
121