Panasonic WJ-SX150 Series Addendum page 17

● Still Playback Spot Picture
The playback spot picture can be changed into the still pic-
ture.
Note: To use this function, you need to connect a WJ-HD100
Series recorder or time-lapse VCR to the matrix switcher.
1. Enter the recorder mode. (Refer to Step 1 to 3 of p. 16
Multiscreen Segment Switching.)
2. Press the PLAY/PAUSE button. The system will enter
the playback mode.
3. Select a camera channel by pressing a numeric button
and then pressing the CAM (SET) button. The selected
camera image will be displayed in a spot picture.
4. Press the MENU repeatedly until "Mux Still" appears on
the LCD.
Mux Still
"Input Still CH"
5. Press the F1 button.
The selected camera image will change into the still
picture.
6. To cancel the still picture, press the F1 button again.
Notes:
• Still picture is not available while zooming is activat-
ed.
• Even when still picture is displayed, the playback of
the recorder/time-lapse VCR continues.
● Electronic Zooming (EL-ZOOM)
The playback spot picture can be electrically zoomed.
Note: To use this function, you need to connect a WJ-HD100
Series recorder or time-lapse VCR to the matrix switcher.
1. Enter the recorder mode. (Refer to Step 1 to 3 of p. 16
Multiscreen Segment Switching.)
2. Press the PLAY/PAUSE button. The system will enter
the playback mode.
3. Select a camera channel by pressing a numeric button
and then pressing the CAM (SET) button. The selected
camera image will be displayed in a playback spot pic-
ture.
4. Press the EL-ZOOM button.
"+" signs will appear on the image.
5. To move the "+" signs within the picture, move the 3D
joystick.
6. Press the EL-ZOOM button. The area surrounded by
7. To move the zoom area, move the 3D joystick.
8. To cancel the zooming, press the EL-ZOOM button.
Note: When a WJ-HD100 Series recorder or a Panasonic
052
the "+" signs will be zoomed up.
Note: Still picture is not available while zooming is acti-
vated.
time-lapse VCR is connected to the matrix switcher,
recording status will appear on the monitor in the
recorder mode. When the normal recording is activat-
ed, "REC" will appear on the monitor. When the alarm
recording is activated, "REC ALM" will appear.
REC
REC ALM
17