Step 3 Setting The Channels And Clock - Panasonic DMR-T3040 Operating Instructions Manual

STEP 3 Setting the channels and clock (173
CL
(b, DVD POWER — O © GD:
>
D
=
=
E:
o
12
—-— RETURN
In accordance with the Antenna System (TV or CATV) setting,
channels will be set as shown in the tables below.
e TV Mode
e CATV Mode
BEL NNNM. NN
66—94
ULTRA BAND 1002198
Preparation
e Confirm that the antenna is connected correctly.
e Turn on the television and select the appropriate video input to
Suit the connections to this unit.
1 Press [ib, DVD POWER] to turn the
unit on.
2 Press [SET UP] to show the menus.
{__Antenna System | QAN
Channel Caption
=< | Preset Channel Caption
=
VCR Plus+ CH Setting
3 Press [A, V]to select "Channel" and
press [P].
RQT6637.
4 Press [A, V]to select "Antenna Sys-
tem" and prene iulii
D Press [A, V] to select "TV" or
"CATV" and press [ENTER].
TV: TV broadcast (2CH-69CH)
CATV: CATV broadcast (1CH-125CH)
6 Press [A, V]to select "Auto Channel
Setting" and press [ENTER].
AUG. Kei nu Clock. Setting 2
Connacl antenna cable and il you usa a
cable box" tune it to your local PBS CH
(ike
Please push the ENTER key.
7 Press [ENTER].
Auto setting starts. This takes a few minutes. (To stop auto
channel setting, press [RETURN].)
if you have not set the clock, the unit will carry out Auto Clock
Setting. The time is PM when finished.
EP Auto Clock Setting Sree
Auta Clock Setting is campleta'
Channel
TIME ZONE.... CST
8 Press [ENTER] to end the setting.
* After carrying out Auto Channel Setting, make sure you re-set
VCR Plus+ guide channel (page 14) and Channel Caption
(page 15).
Notes on Auto Clock Setting
èlf you connect the unit through a cable TV box or DSS receiver
(page 56) and the Auto Channel Setting is not able to find a
local PBS station, the Auto Clock Setting will not work properly. if
there is no local PBS channel in your area, set the clock manually.
e DST, Daylight Saving Time, shows the summertime setting.
ə TIME ZONE shows the time difference from Greenwich meantime
(GMT).
EST=GMT—5, CST=GMT—6, MST=GMT-—7, PSTzGMT- 8,
AST=GMT-—9, HST=GMT—10, For other areas: xx hr
To return to the previous screen
Press [RETURN].
When you are finished
Press [SET UP}.
If the unit couldn't set the clock automatically
Refer to page 13, "Manual Clock Setting", step 4.
If the clock is an hour slower or faster
Refer to page 13, "Time Zone Adjust".
If unnecessary channels are set or necessary channels
are not set
Refer to page 13, "Adding and deleting channels".