Figure 2-5. Hazardous Area Oxymitter 4000 Mounting Plate Installation - Emerson Rosemount Analytical Oxymitter 4000 Instruction Manual

Instruction Manual
IB-106-340C Rev. 4.1
July 2004
INSTALLATION FOR METAL
WALL STACK OR DUCT
CONSTRUCTION
MTG HOLES
SHOWN ROTATED
o
45 OUT OF
TRUE POSITION
WELD OR BOLT MOUNTING
PLATE TO METAL WALL
OF STACK OR DUCT.
JOINT MUST BE AIRTIGHT.
WELD OR BOLT MOUNTING
PLATE TO METAL WALL
OF STACK OR DUCT.
JOINT MUST BE AIRTIGHT.

Figure 2-5. Hazardous Area Oxymitter 4000 Mounting Plate Installation

2-6 Installation
ABRASIVE SHIELD MOUNTING
13 (0.50)
95 (3.75)
MIN DIA HOLE
IN WALL
STACK OR DUCT
METAL WALL
PROBE MOUNTING
82.5 (3.25)
MIN DIA HOLE
IN WALL
STACK OR DUCT
METAL WALL
NOTE: DIMENSIONS IN MILLIMETERS WITH
INCHES IN PARENTHESES.
Hazardous Area Oxymitter 4000
INSTALLATION FOR MASONRY
WALL STACK CONSTRUCTION
BOLT MOUNTING
PLATE TO OUTSIDE
WALL SURFACE
FIELD WELD
PIPE TO
MOUNTING PLATE
MTG HOLES
SHOWN ROTATED
o
45 OUT OF
TRUE POSITION
JOINT MUST
BE AIRTIGHT
OUTSIDE WALL
SURFACE
NOTE: ALL MASONRY STACK WORK AND JOINTS EXCEPT
ADAPTOR PLATE NOT FURNISHED BY ROSEMOUNT.
BOLT MOUNTING
PLATE TO OUTSIDE
WALL SURFACE
JOINT MUST
BE AIRTIGHT
OUTSIDE WALL
SURFACE
Rosemount Analytical Inc. A Division of Emerson Process Management
13 (0.50)
114 (4.50)
O.D. REF
PIPE 4.00 IN. SCHED 40
PIPE SLEEVE (NOT
BY ROSEMOUNT)
LENGTH BY CUSTOMER
MASONRY
STACK WALL
FIELD WELD
PIPE TO
MOUNTING PLATE
102 (4.0)
O.D. REF
PIPE 3.5 IN. SCHED 40
PIPE SLEEVE (NOT
BY ROSEMOUNT)
LENGTH BY CUSTOMER
MASONRY
STACK WALL
27540004