Figure 1-7. Typical System Installation - Oxymitter 4000 With Remote Electronics - Emerson Rosemount Analytical Oxymitter 4000 Instruction Manual

Instruction Manual
IB-106-340C Rev. 4.1
July 2004
GASES
STACK
OXYMITTER 4000
REMOTE
ELECTRONICS
LOGIC I/O
4 TO 20 mA
SIGNAL
REMOTE MOUNTED SPS 4000*
SINGLE PROBE
AUTOCALIBRATION OPTION
(WITH REFERENCE AIR OPTION)
OXYMITTER 4000
REMOTE
ELECTRONICS
INSTRUMENT AIR SUPPLY
(REFERENCE AIR)
CALIBRATION GAS 1
CALIBRATION GAS 2
VOLTAGE
Figure 1-7. Typical System Installation – Oxymitter 4000 with Remote Electronics
1-8 Description and Specifications
STANDARD
DUCT
ADAPTER PLATE
FLOWMETER
CALIBRATION
GAS
LINE
VOLTAGE
GASES
DUCT
STACK
SPS 4000
4-20 mA SIGNAL, RELAY
LINE
OUTPUTS, AND REMOTE
CONTACT INPUT
Hazardous Area Oxymitter 4000
INSTRUMENT
AIR SUPPLY
(REFERENCE AIR)
PRESSURE
REGULATOR
GASES
STACK
ADAPTER PLATE
OXYMITTER 4000
REMOTE
ELECTRONICS
LINE VOLTAGE
ADAPTER
PLATE
CALIBRATION GAS
REFERENCE AIR
*NOTE: THE IMPS 4000 OR SPS 4000 MUST
Rosemount Analytical Inc. A Division of Emerson Process Management
IMPS 4000*
MULTIPROBE
AUTOCALIBRATION
OPTION
DUCT
CALIBRATION GAS
REFERENCE AIR
LOGIC I/O
4 TO 20 mA
SIGNAL
LINE VOLTAGE
BE INSTALLED IN A NON-HAZARDOUS,
EXPLOSIVE-FREE ENVIRONMENT.
IMPS 4000
37270006