The Power LED Flashes after Power-on
Check the following points
●
Did you unlock the transport lock switch? (page 43)
If the problem still persists, check each item in
Provider (page 54)
product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety
Precautions supplied with this product, and then make an inquiry.
●
Did you unlock the transport lock switch?
Solution
Turn off the scanner, and unlock the transport lock switch.
For details about how to turn off the scanner, refer to
For details about unlocking the transport lock switch, refer to Getting Started.
first, then contact the distributor/dealer where you purchased this
43
Before You Contact the Scanner Service
How to Turn the Power OFF (page
Troubleshooting
20).