Connecting The Power Cord; To Connect The Power Cord - Ricoh IS01 Operator's Manual

SETTING UP THE SCANNER

CONNECTING THE POWER CORD

Use only the power cord that comes with the scanner to connect it to a power
source.
Note the following important points when connecting the power cord.
Use only the power cord supplied with the scanner.
Connect the power cord to the scanner and plug it into a wall outlet before
turning on the power switch.
The plug is equipped with a grounding pin, and must be plugged into a
grounded outlet.

To connect the power cord

Make sure that scanner power is
turned off.
Attach the power cord to the
power cord socket on the back of
the scanner.
Plug the other end of the power
cord into a standard grounded
wall outlet.
1-10
All manuals and user guides at all-guides.com