Controlling What You See; Selecting And Adjusting A Camera Or Other Video Source - Polycom VSX Series Getting Started Manual

G S G
ETTING TARTED UIDE FOR THE

Controlling What You See

Selecting and Adjusting a Camera or Other Video Source

10
VSX S
ERIES
Adjusting your cameras lets you show conference participants what you want
them to see. You can adjust cameras and other video sources before the
meeting starts and while the meeting is in progress.
You can use the remote control to select the main camera or any other near-
site or far-site video sources, such as document cameras, laptops, VCRs or
DVD players.
You can also use the remote control to adjust the main camera on VSX 7000
and VSX 8000 systems. If you have a VSX 3000 system, you must pan, tilt,
and focus the main camera manually. You can also adjust any auxiliary
camera or far-site camera that supports pan, tilt, and zoom movement.
You can adjust the far-site camera only if the camera supports pan and tilt, and the far
site system is configured to allow you to control its camera.
To select a near-site or far-site camera or other video source:
1. If you are in a call, press
far-site camera or other video source. The icon on the screen indicates
which you can select:
If you see this icon...
2. Press Camera and then press the number button that corresponds
to the camera or other video source you want to select at the near or
far site. For example, press 1 to select the main camera.
The image from the camera or video source you selected appears on the
screen.
Near or Far to select either a near-site or
You can control this...
Near-site source
Far-site source
.
WWW POLYCOM
. /
COM VIDEODOCUMENTATION