Table of Contents
Advertisement
Power on
To power on the printer:
Turn ON the printer, and then the computer.
The Ready indicator on the printer starts flashing and Initializing is
displayed on the printer's front panel. After approximately
5 minutes, the printer's Ready indicator is lit and Ready is displayed on the
printer's front panel. The printer is ready for printing.
NOTE:
•
When you power on your system for the first time, if New Hardware Found
is displayed on the computer screen, close the dialog box, and install the
printing software using the procedure described in "Installing the
PostScript printer driver for Windows 95" on
Printer Setup
page
78.
37
Advertisement
Table of Contents
