Table of Contents
Advertisement
Front panel
service calls
Message
Transfer
wearing out
Transparency Tray
Not installed
Upper Left side door
Open
Upper Tray
Empty
Upper Tray
Not installed
Warming Up
Yellow Toner Cartridge
Not installed
Yellow Toner
Empty
Some operation errors cause the error indicator to blink and printing to stop.
A message will be displayed on the front panel until the problem is fixed. If
the front panel message includes the instruction, Call for Service, contact
an authorized service representative.
In addition, if the following conditions occur, turn off and unplug the printer
from the outlet and contact a qualified service representative:
•
The power cord or plug is damaged or frayed.
•
Liquid has been spilled into the printer.
•
The printer has been exposed to rain or water.
•
The printer does not operate normally though the operating instructions
are being followed. Adjust only those controls that are described in the
operating instructions; improper adjustment of other controls may result in
damage and will often require extensive work to restore the printer to
normal operation.
Care and Maintenance
Corrective action/additional information
Transfer unit will need to be replaced soon.
Install transparency tray.
Close Left side door.
Add media to Upper tray.
Install Upper tray.
Printer is warming up.
Install yellow toner cartridge.
Replace yellow toner.
183
Advertisement
Table of Contents
