Table of Contents
Advertisement
Appendix
Specifications
Printer
This appendix contains specifications for the following:
•
Printer
•
Media
•
Bidirectional Parallel Interface
•
Controller
Printing method
Semiconductor Laser
Power source
Refer to the nameplate on the rear of the unit.
Temperature
Operating:
10°C to 32.5°C (50°F to 90.5°F)
Best Print Quality: 15°C to 25°C (59°F to 77°F)
Storage:
0°C to 40°C (32°F to 104°F)
Humidity
Operating:
20% to 80% RH
Best Print Quality: 30% to 70% RH
Storage:
10% to 80% RH
Warm up time
Less than 300 seconds (at 20°C)
Power consumption
850 W Max. (printing with fuser on),
40 W (standby with fuser off),
35 W (E
S
Mode) Meets E
NERGY
TAR
requirements.
Mass {Weight} of standard unit with consumables
(without optional 2nd cassette feeder)
48.2 kg {106.2 lbs.}
Dimensions of standard unit (Without 2nd cassette feeder)
Height: 463 mm (18.2")
Depth: 493 mm (19.4")
Width:
510 mm (20.1") [784 mm (30.9") with the output tray]
Noise level
53 dB(A) [Printing Mode]
47 dB(A) [Standby mode]
S
power conservation
NERGY
TAR
205
Advertisement
Table of Contents
