Table of Contents
Advertisement
Troubleshooting
Trouble
Ready indicator is
blinking.
Ready indicator is off.
Error indicator is on.
Error indicator is
blinking.
A single color is not
uniform or many vertical
streaks (both light and
dark) of slightly different
density and non-uniform
color.
Care and Maintenance
Possible Cause
The printer is
receiving, processing
or printing job.
You have entered the
Menu mode in the
printer panel.
The printer is
networked and
WebTools are being
accessed.
The printer is not
ready, is disabled, or
has detected an error.
Error occurred that is
not user-correctable.
The printer has
stopped because it
detected a user-
correctable error such
as an open door or a
media jam.
The toner is almost
depleted.
Corrective Action
Wait for the job to be
completed or cancel
the job.
Exit the Menu mode
by pressing the Menu/
Exit button.
Wait for the job to be
completed.
Read the printer
panel message to
determine the printer
status.
Turn the printer off
and back on again. If
the indicator is still on,
the printer requires
service.
Correct the condition
displayed on the
printer panel (e.g.,
close the door or clear
the media jam).
Replace the color
toner cartridge.
167
Advertisement
Table of Contents
