DP-CL18
8.12. Power Supply Unit (Power Supply Board and IH Power Board)
Before performing the following steps, remove the rear cover, right cover, left cover, top cover and accumulator unit.
(1)
Remove the screw from the protect cover.
(2)
Slide out the protect cover in the Arrow (B) direction while
pushing softly the hook using a small pin.
(3)
Disconnect the IH cable from the power supply board.
(4)
Remove the 13 screws and earth plate.
(5)
Slide out in the arrow (1) direction while disconnecting the
4 connectors.
144