Table of Contents
Advertisement
Static electricity
damage
Waste disposal
method
To prevent static electricity damage to any of the following components,
touch a grounded metal surface, such as the printer's bare metal frame prior
to touching the component.
•
The interface connectors—parallel and optional network
•
Electrical components, connectors inside the printer, any components on
the optional board (hard disk drive, SDRAM DIMMs, Ethernet network
card, or Token Ring network card)
•
The connector pins on the optional 2nd cassette feeder for the printer
Waste material may be dumped or incinerated under conditions which meet
all federal, state and local environmental regulations.
Before You Start
19
Advertisement
Table of Contents
