Table of Contents
Advertisement
Front Panel Messages
Front panel
status and error
messages
When an error interferes with printing, you will see a message on the front
panel. The following table lists the messages in alphabetical order, with the
appropriate corrective action for each one.
NOTE:
•
If the message indicates that you don't have enough memory to finish
printing, you may need to install additional memory to handle your
workload. See "Installing additional memory" on
The following status messages cause the Ready indicator to blink. Printing
will continue when corrective action (if required) is taken, and the Ready
indicator is lit.
Message
%s%s.%s Error
DIMM Slot %s
Black Toner Cartridge
Not installed
Black Toner
Empty
Canceling Job
Cannot recover from JAM
Press Enter
Charger
Not installed
Controller Memory Error
Cycle Power
Cyan Toner Cartridge
Not installed
Cyan Toner
Empty
DC Controller
Malfunction
Disk File
Operation Failed
Care and Maintenance
page
Corrective action/additional information
Cycle Power. If printer does not function
normally, call for service.
Install black toner cartridge.
Replace black toner.
When the Cancel/Left button is pressed, the
job currently being processed is deleted.
Semi Automatic duplex is aborted by jam.
Install the charger unit.
Cycle Power. If printer does not function
normally, call for service.
Install cyan toner cartridge.
Replace cyan toner.
Cycle Power. If the printer does not function
normally, call for service.
Hard disk is functioning abnormally. Cycle
Power. If printer does not function normally,
call for service.
199.
177
Advertisement
Table of Contents
