Table of Contents
Advertisement
7
Type a new line anywhere in the file as follows:
set Bindery Context = (Enter your bindery context here)
NOTE:
•
To the right of the equals sign, type the bindery context obtained
from the system administrator.
8
Press Esc to close the window, and save changes.
9
Proceed to the next section.
To activate the bindery context:
1
If you cannot reboot the NetWare server at this point,
type the set command manually at the server's
command prompt.
Use the same command that you entered in the autoexec.ncf file
(see
step 7
in the previous procedure).
2
If you can reboot the NetWare server, the set command
is loaded automatically.
You are ready to set up the KX-P8420 print server and print queue.
See the next section for details.
Connecting the Printer to a Network
65
Advertisement
Table of Contents
