Engine Control Board, Toner Cartridge Holder, Cartridge Drive Unit, Paper Pickup Motor, Main Drive Unit, Bias Unit; Fan Motor And Fan Motor Duct - Panasonic DP-CL18 Service Manual

8.7. Engine Control Board, Toner Cartridge Holder, Cartridge Drive Unit,
Paper Pickup Motor, Main Drive Unit, Bias Unit, Fan Motor and Fan
Motor Duct
8.7.1. Engine Control and Temperature/Humidity Sensor Boards
Before performing the following steps, remove the left, top and rear covers.
(1) Remove the engine board shield cover (8 screws).
(2) Disconnect all cables from the engine control board.
(3) If the main control board is installed, remove it.
(4) Remove the engine board (7 screws).
(5) Remove the engine board small (3 screws) and large
brackets [2 screws (A) and 4 screws (B)].
(6) Remove the temperature/humidity sensor board.
123
DP-CL18