Static Electricity Damage; Interface Cable; Waste Disposal Method - Panasonic KX-P8410 Operating Instructions Manual

CD-ROM
To prevent the CD-ROMs from accidental damages:
BDo not touch or write on the
surface of the disc.
BDo not place heavy objects on
the disc case or drop the case.

Static Electricity Damage

To prevent static electricity damage to any of the following components, touch a grounded metal surface,
such as the printer's bare metal frame prior to touching the component.
BThe interface connectors : SCSI, parallel and optional network
BElectrical components, connectors inside the printer and any components on the optional board (RAM
Expansion Board or Ethernet Card)
BThe connector pins on the optional 2nd cassette feeder for the printer

Interface Cable

Always use a shielded interface cable. Use of an unshielded cable can result in radio interference with data.

Waste Disposal Method

Waste material may be dumped or incinerated under conditions which meet all federal, state and local
environmental regulations.
BDo not leave the disc out of the
protective case.
BTo clean the disc, hold the disc
by its edges and wipe it from
the center to the edges with a
dry, soft cloth.
Before You Start
BDo not leave the disc in direct
sunlight or near heat sources.
13