Handset Key Tone; Re-Registering The Handset - Panasonic KX-TG2433BX Operating Instructions Manual

TG2433BX_2434BX(e).book Page 37 Thursday, March 31, 2005 10:57 AM
To turn dial lock off
1
Press {MENU}.
2
Scroll to "Dial lock" by pressing {V}
or {^}, then press {>}.
3
Enter the same password that was
entered when dial lock was turned on.
4
Press {Save}.
5
Press {Yes}.
L "Dial lock off" will be displayed.
6
Press {OFF}.
Note:
L If you forget the password, consult your
nearest Panasonic service center.

Handset key tone

You can select whether or not key tones
are heard when keys are pressed.
Includes confirmation tones and error
tones. The default setting is ON.
1
Press {MENU}.
2
Scroll to "Initial setting" by
pressing {V} or {^}, then press {>}.
3
Scroll to "Key tone" by pressing {V} or
{^}, then press {>}.
4
Press {V} or {^} repeatedly to select
"On" or "Off".
5
Press {Save}, then press {OFF}.

Re-registering the handset

If "No link to base. Move closer
to base, try again." is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
Important:
L Make sure the base unit is not being
used.
Programmable Settings
L Have the handset and base unit near
each other when re-registering the
handset.
L KX-TG2434BX only:
Confirm the extension number of the
handset which has lost the
communication by placing the handset
on the base unit or charger.
If you re-register the handset using the
other handset's extension number [1]
or [2], the other handset will not
function.
1
Handset:
Press {MENU}.
2
Scroll to "Initial setting" by
pressing {V} or {^}, then press {>}.
3
Scroll to "Registration" by pressing
{V} or {^}, then press {>}.
4
KX-TG2433BX base unit:
Press and hold {LOCATOR/
INTERCOM} until the CHARGE
indicator flashes.
KX-TG2434BX base unit:
Press and hold the locator/intercom
button that corresponds to the handset
you want to re-register ({LOCATOR/
INTERCOM 1} or {LOCATOR/
INTERCOM 2}) until the registering
handset number (H1 or H2) is
displayed.
L After the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
5
Handset:
Press {OK}, then wait until the handset
beeps.
L Registration is complete.
37