Table of Contents
Advertisement
NETWORK menu (continued)
Wired LAN
You can make detailed wired LAN settings.
1
Press ▲ ▼ to select [Wired LAN], and press <SELECT> button.
The [Wired detailed setup] screen appears.
2
Press ▲ ▼ to select an item, and change the setting according to the instructions.
DHCP
(DHCP client function)
IP address
(Display of IP address and setting)
Subnet mask
(Displaying and setting the subnet mask)
Default gateway
(Display of gateway address and setting)
DNS1
(Display of Preferred DNS server
address and setting)
DNS2(Display of Alternate DNS
server address and setting)
"Glossary" (
See page 44 – 45)
3
Press ▲ ▼◄► to select [Set], and press <SELECT> button.
Save the current network settings.
•
Before using the DHCP server, make sure the DHCP server is already functioning.
•
For details of IP address, subnet mask, gateway and DNS server, ask the network administrator.
•
A wired LAN and wireless LAN cannot be used in the same segment.
„ Default wired LAN settings
The following settings are set before the projector leaves the factory.
DHCP
IP address
Subnet mask
Default gateway
DNS 1/DNS 2
10
ON:
OFF: If a DHCP server does not exist in the network to which
Enter the IP address if DHCP server is not used.
If not using a DHCP server, enter the subnet mask.
Enter the gateway address if DHCP server is not used.
Enter the DNS server address if DHCP server is not used.
Enter the alternate DNS server address if DHCP server is not
used.
Off
192.168.10.100
255.255.255.0
192.168.10.1
NONE
If a DHCP server exists in the network to which the
projector is connected, the IP address will automatically be
acquired.
the projector is connected, additionally set [IP address
[Subnet mask
] and [Default gateway
],
].
Advertisement
Table of Contents
