Furuno DS-60 Operator's Manual page 78

*1
Echo Monitor
3 Way Split
Point 1 (Beam 1 , Beam 2, Beam 3, Ch1, Ch2, Ch3, Ch4, Ch5, Ch6, Ch7, Ch8, Ch9)
Point 2 (Same choices as Point 1. Default - Beam 2 )
Point 3 (Same choices as Point 1. Default - Beam 3 )
Start Start
12 Way Split
*1
TX Monitor (Start)
*1
Alert
Active Alert List
Alert Log
*1
ROT Sensor ( (Internal , External ROT, External HDG)
TESTS (System TEST, Display Unit TEST, LCD TEST)
*1
System
System Parameters
Ship's Speed Average (5 s, 10 s ,15 s, 30 s, 60 s)
Current Average (1 min, 2 min, 3 min , 5 min, 10 min)
Track Depth (0.5 m to 25.0 m; default 1.0 m )
Current Measurement (0 5 m to 25 0 m; default 2 0 m ) Current Measurement (0.5 m to 25.0 m; default 2.0 m )
CALC Average (No Averaging, 10 s, 30 s, 60 s , 90 s, 120 s)
IR (ON, OFF )
Log Pulse Speed (STW&GPS , SOG&STW&GPS, SOG&GPS, STW)
Log Pulse Output (Forward, Forward-After , Vector)
Beam Direction (Forward , After)
TVG Curve (0 to 19)
ECHO FAIL Limit (0 to 9)
Offset Data
Trim (-12.5 deg to +12.5 deg)
Heel (-12.5 deg to +12.5 deg)
XDCR (-60.0 deg to +60.0 deg)
Compass Calibration (-12.5 deg to +12.5 deg)
SOG Calibration ( 12 5% to +12 5%) SOG Calibration (-12.5% to +12.5%)
STW Calibration (-12.5% to +12.5%)
Setting Ship's Data
LOA (50.0 m to 400.0 m)
B (5.0 m to 100.0 m)
L1 (0.0 m to LOA)
L2 (0.0 m to B
L3 (0.0 m to LOA)
L4 (0.0 m - B)
L5 (0.0 m - LOA)
D (0.0 m - LOA-L1)
User Reset (Yes, No )
AP-2 AP-2
Continued from previous page.
, ,
( )
*3
*3
(0 0 to
)