Furuno DS-60 Operator's Manual page 20

1. INTRODUCTION
3. Select an item from the menu options window then press the ENT key. One of the
four types of boxes shown below appears. Follow the related procedure to make
your selection.
Input
cursor
(yellow)
4. Control is returned to the menu window. Press the DISP key to close the menu.
1-10
List box
1. Select option with
2. Press ENT key.
Spinner box(alphanumeric data)
The input cursor is initially at
the far-left position.
1. Select character with
2. Press ENT key to confirm.
The input cursor moves to
next input point.
3. Repeat steps 1 and 2 to
complete the name.
You can move the input cursor
with ENT, MENU/ESC.
ENT: Move right.
MENU/ESC: Move left.
, .
Check box
1. Select option with
2. Press ENT key to check
or uncheck box.
, .
Spinner box(numeric data)
1. Set value with
2. Press ENT key to confirm.
, .
, .