Appendix B Initial Configuration Wizard - Juniper SSG 5 Serial Hardware Installation

Appendix B
Initial Configuration Wizard
This appendix provides detailed information about the Initial Configuration Wizard
(ICW) for an SSG 5 device.
After you have physically connected your device to the network, you can use the
ICW to configure the interfaces that are installed on your device.
This section describes the following ICW windows:
1. Rapid Deployment Window on page 50
2. Administrator Login Window on page 50
3. WLAN Access Point Window on page 51
4. Physical Interface Window on page 51
5. ISDN Interface Windows on page 52
6. V.92 Modem Interface Window on page 54
7. Eth0/0 Interface (Untrust Zone) Window on page 55
8. Eth0/1 Interface (DMZ Zone) Window on page 56
9. Bgroup0 Interface (Trust Zone) Window on page 56
10. Wireless0/0 Interface (Trust Zone) Window on page 58
11. Interface Summary Window on page 60
12. Physical Ethernet DHCP Interface Window on page 60
13. Wireless DHCP Interface Window on page 61
14. Confirmation Window on page 61
49