Wireless Dhcp Interface Window; Confirmation Window - Juniper SSG 5 Serial Hardware Installation

13. Wireless DHCP Interface Window

Select Yes to enable your device to assign IP addresses to your wireless network via
DHCP. Enter the IP address range that you want your device to assign to clients
using your network.

14. Confirmation Window

Confirm your device configuration and change as needed. Click Next to save, reboot
the device, and run the configuration.
After you click Next, the device reboots with the saved system configuration. The
WebUI login prompt appears. For information on how to access the device using the
WebUI, refer to "Using the WebUI" on page 25.
61