Etsi; Connectors - Juniper SSG 5 Serial Hardware Installation

ETSI

Connectors

European Telecommunications Standards Institute (ETSI) EN-3000386-2:
Telecommunication Network Equipment. Electromagnetic Compatibility
Requirements; (equipment category-Other than telecommunication centers)
Figure 17 shows the location of the pins on the RJ-45 connector.
Figure 17: RJ-45 Pinouts
1 2 3 4 5 6 7 8
Table 10 lists the RJ-45 connector pinouts.
Table 10: RJ-45 Connector Pinouts
Pin Name
1 RTS Out
2 DTR Out
3 TxD
4 GND
5 GND
6 RxD
7 DSR
8 CTS
I/O Description
O Request To Send
O Data Terminal Ready
O Transmit Data
N/A Chassis Ground
N/A Chassis Ground
I Receive Data
I Data Set Ready
I Clear To Send
47
Connectors