Deciding On Where To Install The Product - Samsung AC BNPDBC Series User & Installation Manual

Deciding on where to install the product

Indoor Unit
• Install the unit at a place close to the wall facing the outside as it
is necessary to perform piping connection with the outdoor unit.
It is effective to install the unit at a window side to ensure
uniform distribution of indoor temperature.
• Install the unit at a place where there is no obstacle against the
wind around the air intake and air outlet.
• Install the unit horizontally at a stable, rigid place. (When
installing the unit at a place subjected to oscillation, noise may
occur.)
• Avoid a place near the door which is frequented by people.
• Avoid a place subject to direct sunlight.
• Avoid a place with high humidity. Dew may form during cooling
operation. (Near kitchen)
Outdoor unit
• Avoid a place that may disturb your neighbor. Noise may occur from the outdoor unit and the discharged
air may run into the neighborhood. (Be careful of the operation time in a residential area)
• Install the outdoor unit on a hard and even area that can support its weight.
• Choose a flat place that rainwater does not settle or leak.
• Choose a place avoiding strong winds.
• Maintain sufficient space for repairs and service.
• Choose a place where you can easily connect the pipes and cables to the indoor unit.
• Make sure that the condensed water dripping from the drain hose runs out properly and safely.
• When installing the outdoor unit near seashore, make sure it is not directly exposed to sea breeze. If you
can not find a adequate place without direct sea breeze, protection wall should be constructed.
• Install the outdoor unit in a place (such as near buildings etc.) where it can be prevented from sea breeze
which can damage the outdoor unit.
Top view
Front
More than 600mm
Side view
More than 600mm
Air outlet
Front
Air inlet
More than 1000mm
English 31