Inserting the batteries
CAUTION
• Make sure that water is not Allowed to enter the remote controller.
NOTE
• There is a possibility that the air conditioner will not operate by remote controller near strong light
such as a fluorescent lamp or neon sign. In this case, use the remote controller in front of the remote
controller receiver of the indoor unit.
1 Open the battery cover of the remote controller.
• Press the (
) part gently and lift it up in the arrow direction.
2 Insert the batteries.
• Check and match the (+) and (-) signs accordingly.
3 Close the battery cover.
• Match the cover and bottom part of the remote controller and
press it until you hear click sound.
English
13