Preparation for installation
AA
Accessories
The following accessories are supplied with the indoor unit.
The type and quantity may differ depending on the specifications.
Pattern sheet
Flexible hose
Deciding on where to install the indoor unit
Indoor unit
There must be no obstacles near the air inlet and outlet.
Install the indoor unit on a ceiling that can support its weight.
Maintain sufficient clearance around the indoor unit.
Make sure that the water dripping from the drain hose runs away correctly and safely.
The indoor unit must be installed in this way, that they are out of public access. (Not touchable by the users)
CAUTION
• If you install the cassette or duct type indoor unit on the ceiling with temperature over
27°C or humidity over 80%,you must apply extra 10mm of polyethylene foam or other
insulation with similar material on the body of the indoor unit.
Space requirements for indoor unit
18 English
Insulation cover
Insulation cover
pipe A
Cable-tie
user & installation
Insulation drain
pipe B
manual
Flexible hose clamp