Samsung AC BNPDBC Series User & Installation Manual page 72

How to connect your extended power cables
3 Insert both sides of core wire of the power cable into the connection sleeve.
• Method 1: Push the core wire into the sleeve from both sides.
• Method 2: Twist the wire cores together and push it into the sleeve.
Method 1
Connection sleeve
CAUTION
• If cable wires are connected without using connecting sleeves, their contact area becomes reduced, or
corrosion develops on the outer surfaces of the wires (copper wires) over a long time. This may cause an
increase of resistance (reduction of passing current) and consequently may result in a fire.
4 Using a crimping tool, compress the two points and flip it over and compress another two points in the
same location.
• The compression dimension should be 8.0.
• After compressing it, pull both sides of the wire to make sure it is firmly pressed.
Method 1
Compress it 4 times.
5 mm
72 English
Method 2
Connection sleeve
Compression
dimension
Method 2
Compress it 4 times.
5 mm