Toshiba Satellite 110 Series Maintenance Manual page 99

If the changed item requires the system to reboot, the following message displays:
Are you sure? (Y/N)
The changes you made cause the system to reboot.
To make other changes, press N. Repeat the steps above.
2.
To accept the changes, press Y.
3.
NOTE: You can press Esc to quit at any time without saving changes.
SETUP asks you to confirm that you don't want to save your changes.
The Factory Preset Configuration
When you access SETUP, the current configuration displays.
To show the factory preset configuration, press Home.
1.
To accept the default settings, press End and then press Y.
2.
NOTE: When you execute the default setting, the following settings are not
changed:
SETUP Options
The SETUP Screen is divided into functionally related groups. This section describes each
group and its options.
1. Memory
Lists the computer's memory allocations. You cannot change these values.
(a) Total
Displays the total amount of memory installed, which is automatically
calculated by the computer.
(b) Base
Displays the amount of base (conventional) memory, 640 KB, and is auto-
matically calculated by the computer.
110 Series
HDD Mode
Password
Write Policy
3-53