Toshiba Satellite 110 Series Maintenance Manual page 103

When you select one of the above options, except for Not used, a sub-
window similar to the one below appears to let you set the parallel port
mode. The options for this setting are ECP (default) and Std. Bi-Direc-
tional.
For most printers, the port should be set to ECP. With some other parallel
devices, the setting should be Std. Bi-Directional.
6. Others
Whether you need to configure the computer with these options depends primarily
on the kind of software or peripherals you use.
(a) Power-up Modes
This option lets you choose between AutoResume and Boot mode. You can
also set this option using hotkeys. AutoResume is effective with either the
internal LCD or with an external monitor.
(b) CPU Cache
Use this feature to enable or disable the CPU cache.
When enable is selected, a subwindow similar to the one below displays to
let you select the cache write policy. The options for this setting are Write-
back (default) and Write-through.
Write-back policy provides better system performance because main
memory is accessed only when necessary to update the cache contents with
changes in main memory. Write-through policy accesses main memory
every time the processor handles data.
110 Series
Option
Mode =
Boot Turns on Boot mode. (Default)
Resume Turns on the AutoResume feature.
Enabled Enables the CPU cache. (Default)
Disabled Disables the CPU cache.
Option
Write Policy = Write-back
ECP
3-57