4.5
Hard Disk Drive (HDD)
Removing the HDD
To remove the HDD, follow the steps below and refer to Figures 4-9 and 4-10.
1.
Turn the computer off. Disconnect the AC power cord and all external cables
connected to the computer.
2.
Remove the battery pack, optional PC card and optional memory module as
described in Sections 4.2, 4.3, and 4.4.
3.
Remove two M2.5x6 screws securing the HDD frame and brace to the
computer.
4.
Pull the frame forward by its handle to disconnect the HDD.
5.
Remove the frame and brace with the HDD.
NOTE: Keep the brace with the frame.
Figure 4-9 Removing the frame and brace with the HDD
4-12
110 Series