Toshiba Satellite 110 Series Maintenance Manual page 90

3.20 Running Test
3.20.1 Function Description
This function automatically executes the following tests in sequence:
1. System Test (Subtest 01)
2. Memory Test (Subtests 01, 02, 04, 06)
3. Display Test (Subtests 01 through 08)
4. FDD Test (Subtest 02)
5. HDD Test (Subtests 01, 05)
6. Real Timer Test (Subtest 02)
7. Printer Test (Subtest 03)
8. Async Test (Subtest 01)
The system automatically detects the number of floppy disk drives connected to the computer
for the FDD Test.
3.20.2 Operations
NOTE: Do not forget to load a work disk in the FDD. If a work disk is not loaded, an
error will be generated during FDD testing.
1. Remove the Diagnostics Disk from the floppy disk drive and insert the work disk.
2. Select 6 from the Diagnostics Menu and press Enter. The following message
displays:
Printer wrap around test (Y/N) ?
Selecting Y (yes) executes the Printer Wraparound Test. A printer wraparound
connector must be connected to the parallel port on the back of the computer to
properly execute this test.
Select Y or N and press Enter. The following message appears:
3.
Serial #A wrap around test (Y/N) ?
Selecting Y (yes) executes the Async Wraparound Test. An RS-232-C wrap-
around connector must be connected to the serial port on the back of the
computer to properly execute this test.
3-44
110 Series