Installing the FL
To install the FL, follow the steps below and refer to Figure 4-38.
1.
Place the FL in the frame. Lift up the plastic film to route the FL cable.
2.
Seat the metal FL cover.
3.
Secure the metal FL cover with two M2x6 silver screws and an inch screw.
4.
Install the LCD module, FL inverter board, display mask, optional PC card,
optional memory module, and the battery pack as described in Sections 4.16,
4.14, 4.13, 4.4, 4.3, and 4.2.
110 Series
4-43