4.9
Floppy Disk Drive (FDD)
Removing the FDD
To remove the FDD, follow the steps below and refer to Figures 4-23 and 4-24.
1.
Turn the computer off. Disconnect the AC power cord and all external cables
connected to the computer.
2.
Remove the battery pack, optional PC card, optional memory module, HDD,
keyboard, sub-battery, VGA board, RTC battery, and top cover with display
assembly as described in Sections 4.2 through 4.8.
3.
Remove four M2.5x6 screws from the FDD assembly.
4.
Disconnect the FDD cable from PJ5 on the system board and lift out the drive.
4-24
Figure 4-23 Removing the FDD assembly
110 Series