Toshiba Satellite 110 Series Maintenance Manual page 101

DSTN Display (110CS)
NOTE: If DSTN screen flickers with an LCD Display Colors setting of
222K Colors, select 4096 Colors.
(e) Power On Display
This option is used to select the display when booting up.
Internal/External
NOTE: When starting the computer in Resume mode, the last configu-
ration is remembered. If data does not appear on the display you are
using after starting in Resume mode, press Fn+F5. Pressing Fn+F5
changes the display setting in the following order: internal LCD to
simultaneous to external CRT.
(f) Text Mode Stretch
Text mode stretch enables a larger display area of 800 x 600 pixels in text
mode. Disabling this function reduces the display area to the standard 800 x
600 pixels.
3. Hard Disk
Displays the mode of the HDD for information only. It cannot be changed.
(Normal)
110 Series
222K colors Displays 256 out of 226,981 colors.
4096 colors Displays 256 out of 4096 colors.
Selects an external CRT if one is connected, other-
wise it selects the internal LCD. (Default)
Simultaneous Selects both the internal LCD and the external CRT
for simultaneous display.
Enabled Enables the text mode stretch feature. (Default)
Disabled Disables the text mode stretch feature.
Enhanced IDE Select this mode when using MS-DOS,
Windows, or OS/2. (Default)
Standard IDE Select this mode when using Novell NetWare or
UNIX. When this mode is selected, up to 504 MB
is logically available even though the hard disk
drive's capacity is larger than 504 MB.
3-55