Toshiba Satellite 110 Series Maintenance Manual page 144

4.14 Fluorescent Lamp (FL) Inverter Board (110CT with TFT)
Removing the FL Inverter Board
To remove the FL inverter board, follow the steps below and refer to Figure 4-32.
1. Turn the computer off. Disconnect the AC power cable and all external cables
connected to the computer.
2. Remove the battery pack, optional PC card, optional memory module, and display
mask as described in Sections 4.2, 4.3, 4.4, and 4.13.
NOTE: Support the back of the display with your hand when you remove the
screws.
3. Remove two M2.5x6 screws securing the FL inverter board. Note the ground
screw.
4. Disconnect the FL inverter cable from CN1 and the FL cable from CN2 on the
FL inverter board.
5. Lift out the FL inverter board.
Figure 4-32 Removing the FL inverter board (110CT with TFT)
4-34
110 Series