Toshiba Satellite 110 Series Maintenance Manual page 154

4.19 Fluorescent Lamp (FL) (110CS with DSTN)
CAUTION: When you remove the FL, be careful not to let any dust or other foreign
matter enter the LCD panel components. Any contamination can affect the performance
of the unit.
Removing the FL
To remove the FL, follow the steps below. Refer to Figures 4-39 and 4-40.
1. Turn the computer off. Disconnect the AC power cord and all external cables
connected to the computer.
2. Remove the battery pack, optional memory module, optional PC card, display
mask, FL inverter board, and LCD module as described in Sections 4.2, 4.3, 4.4,
4.13, 4.15, and 4.17.
3. Turn the LCD module over and release four latches securing the FL module to
its frame.
4. Remove two M2x6 screws.
Figure 4-39 Removing the FL assembly (110CS with DSTN)
5. Lift the FL module out of the frame.
4-44
110 Series