Fujitsu Airstage J-IVS AJ 040LCLDH Series Design & Technical Manual page 913

¢ Setting of outdoor unit and System controller
To obtain the appropriate power consumption by System controller, the power value measured by an
electricity meter must be properly conveyed. To do this, appropriate setting at the electricity meter,
outdoor unit, and System controller is necessary.
The method of setting the pulse from the electricity meter received by an outdoor unit and the
method of setting the pulse value set by System controller are described here. When electricity me-
ter setting is necessary, perform it in accordance with the instruction manual supplied with the elec-
tricity meter.
Below, the setting method of electricity meters specified in pulse units and that specified in pulse
constant are described.
2-30. Electricity charge apportionment setting (System controller, Touch panel
controller)
- (07-167) -
2. Function settings