Simple Remote Controller (Uty-Rsr, Uty-Rhr) - Fujitsu Airstage J-IVS AJ 040LCLDH Series Design & Technical Manual

2-18. Simple remote controller (UTY-RSR, UTY-RHR)
¢ Remote controller address confirmation
1. Select the "15" in Menu 2-F1 Settings. Then press the "
2. You can check current allocation of 2-wire remote controller address (system number and unit
number).
Press the "
/
NOTE: In the case of automatic address settings, do not change the remote controller address for
the indoor unit, and keep it at the initial setting of "0". Addresses will be automatically set
when initially starting up this unit.
¢ Master or slave setting of remote controller
1. Select the "06" in Menu 2-F1 Settings. Then press the "
2. Select the "0: Master" or the "1: Slave" with the TEMP. "
2-18. Simple remote controller (UTY-RSR, UTY-RHR)
Address automatically
allocated
" button to return to the Menu 2-F1 item selection screen.
" button.
/
System number
Unit number
" button.
/
" or TEMP. "
0: Master
1: Slave
- (07-127) -
" button.
2. Function settings