Fujitsu Airstage J-IVS AJ 040LCLDH Series Design & Technical Manual page 794

3. Touch "Function No." on the Function Setting screen.
4. Function No. screen is displayed. Set the Function No. "02" by touching "
When "OK" is touched, the display returns to the Function Setting screen.
5. Touch "Setting" on the Function Setting screen.
6. Setting screen of "Setting No." is displayed. Set the Setting No. by touching "
ting range is from "00" to "99".)
When "OK" is touched, the Function Setting verification screen is displayed.
7. Touch "Yes" on the verification screen.
After the Setting screen was displayed, the display returns to the Function Setting screen.
 Completion of setting mode
To exit the setting mode and return to the Maintenance screen, touch "Back" on the Function Setting
screen.
1-4. Address setting by remote controller
Function Setting
Address
Function No.
Setting No.
Back
Function No.
02
Cancel
Function Setting
Address
Function No.
Setting No.
Back
Function Setting
Address
Function No.
Setting No.
18
Cancel
Example: When refrigerant circuit address data "18" is set
Function Settung
Function setting will be performed. OK?
No
- (07-48) -
[002–01]
[00]
[00]
Setting
" or "
OK
[002–01]
[02]
[00]
Setting
[002–01]
[02]
OK
Yes
".
" or " ". (Set-
1. System settings